Gas scrubbers

Gas scrubbers neutralize harmful components in industrial air or waste gas streams, for example to prevent fumes that have an irritating effect or cause odor nuisance.

Bio filters

Biofilters are used for the removal of volatile organic compounds, odor components and inorganic compounds. This technology uses micro-organisms to biodegrade polluted substances. 

Regenerative thermal oxidation, PCA Air

Regenerative thermal oxidation is the afterburning of an airflow loaded with solvents. Ceramic beds recover the heat produced during this process, thus reducing operational costs.

Activated carbon filters

Activated carbon is a form of carbon with a very large specific surface where many substances could get attached to. This makes activated carbon an ideal filter medium.

Air stripping, PCA air

Air strippers are used to clean waste water, digestate or polluted groundwater. Through intensive contact between air and water, the volatile compounds present in the waste or ground water are transferred to the air.

Spraying systems, PCA Air

Nebulisers are used to bring very fine droplets into the air. The role of these droplets is very dependent on the end application.

Mechanical Atmospheric Dispersion System

Mechanical Atmospheric Dispersion System is an alternative solution for the dispersion of odor pollution or waste gas streams

pca maintenance

The PCA technicians have the right know-how and tools to maintain the air treatment installations and to achieve optimal operations.

Studies, air treatment and purification, PCA Air

PCA Air carries out studies, gives advice and offers personalised solutions in the field of air purification.

pilot tests

PCA is equipped with a pilot installation for gas scrubbing that can be rented during a desired period.

Treatment products

PCA has its own range of specific chemicals that can be dosed to the wash water of a gas scrubber. This way, it is possible to save on the consumption of scrubber water by reducing the purge (draining of salt rich water).

Constructions and components pca

PCA has its own machinery to assemble plastic constructions. PCA is also able to supply components for replacements or reparations.

process control automation

PCA has been active in the field of process automation since 1991. As one of the few Belgian manufacturers, we have solid experience in various industries.

Service PCA air

Measurements, pilot tests, follow-up & optimization and maintenance.

Subscribe to PCA Air RSS